NXP Smart Card ICs

Ashling SmartICE

Hardware emulator for NXP SmartMX-P5 and SmartMX2-P60 smart card controllers

  • Contact and Contactless probe interface
  • Real-time trace capture of code and data
  • Code coverage analysis
  • Performance analysis for latest SmartMX2-P60
  • SmartICE debugger: Keil µVision or PathFinder


Datasheet



Datasheet

Ashling SmartMRK3-EPK

Hardware emulator for NXP SmartMX3 P71 secure controllers

  • USB2.0 based real-time debug probe
  • Used with NXP Smart Card Composer IDE to debug application code
  • Contact and Contactless card-reader interfacing
  • Supports all P71 family devices
  • NXP SMD IC device ensures accurate P71 emulation (hardware and software)

Datasheet

Ashling SmartPK-P40

Real-Time Prototyping Kit for NXP SmartMX2-P40 Smart Card Controller

After testing and debugging a Smart Card program the designer can download code to the Ashling SmartPK-P40, and test the code in a fully-functioning Card Reader system; the SmartPK-P40 will behave like the target Smart Card containing the ROM-code.



Datasheet

SmartICE Adaptors

IN-S028

Adapter containing ZIF SOIC28 socket for use with INCLA7816USB-CL1/-CL2 or IN-GSM probes. Allows testing of SO28 samples.

IN-QFN32

Allows testing of HVQFN samples. Used together with INCLA7816USB-CL1/-CL2 or IN-GSM probes.

IN-PCD-PDM

Allows testing of PCM / PDM samples. Used with INCLA7816USB-CL1/-CL2 or IN-GSM probes.

IN-ISO7816

Accepts standard ISO7816 smartcard format. Used with INCLA7816USB-CL1/-CL2 or IN-GSM probes.

IN-MOB4/6

Allows testing of MOB4/6 samples. Used with INCLA7816USB-CL1/-CL2 or IN-GSM probes.

IN-GSM

INCLA adapter probe for GSM footprint connection. Connects directly to the 15-pin D-type socket (SmartCard I/F) located on the front-panel of the SmartICE system.

SmartCard Probe Connectors

The IN-CLA7816USB-CL1/-CL2 probes support the following smartcard interfaces:

  • ISO7816 contact-based (located on the component side)
  • Contactless via and an antenna located on the solder side

– The -CL1 Adapter has a full-sized antenna
– The -CL2 Adapter has a half-sized antenna

  • USB interface via a USB type B connector

I/O Splitter Adapter

The INCLA I/O splitter adapter allows measurement of the bi-directional IO pins (x4) between a Card and Reader as unidirectional signals (x8).

Order Codes

ProductOrder Code
SmartICE-XPK High-end emulator including trace & code-coverage and Performance Analysis for NXP P60 devices
Supplied with Ashling PathFinder debugger and Keil µVision drivers
SmartICE-XPK-P60
SmartICE-EPK Entry-level emulator with run-time control for NXP P60 devices
Supplied with Ashling PathFinder debugger and Keil µVision drivers
SmartICE-EPK-P60
SmartICE-PK Prototyping kit with support for program download, storage and execution for NXP P60 devices
Supplied with Ashling PKSC software
SmartICE-PK-P60
SmartICE P60 Adapter - converts an existing P5 unit to a P60AD-SmartICE-P60
SmartICE P5 Adapter - converts an existing P60 unit to a P5AD-SmartICE-P5
SmartMRK3-EPK Debug Probe for NXP P71 secure controller family of devices
Supplied with Ashling software
SmartMRK3-EPK
SmartPK-P40 ROM Prototyping Kit for P40 devices
Supplied with Ashling SMARTPK-P40 software
SmartPK-P40
Smart Card Probe with ISO7816 format contacts, contactless antenna and USB (full-size)IN-CLA7816USB-CL1
Smart Card Probe with ISO7816 format contacts, contactless antenna and USB (half-size)IN-CLA7816USB-CL2
INCLA I/O Data splitter adapter used with IN-CLA7816USB-CL1/2 Smart Card probe IN-CLA7816 I/O Splitter
Adapter for SO28 samples containing ZIF SOIC28 socket for use with IN-CLA7816USB or IN-GSMIN-SO28
Adapter for ISO7816 SmartCardsIN-ISO7816
Adapter for HVQFN32 packaged samplesIN-QFN32
INCLA Probe for GSM footprintIN-GSM
Adapter for PCM / PDM samplesIN-PCM-PDM
Adapter for MOB4 / MOB6 samplesIN-MOB4/6